Description
VideoMic Pro
Compact Directional On-camera Microphone
- Rycote® Lyre® shock mounting onboard
- All-new capsule with lower noise and higher sensitivity
- Broadcast recording quality condenser microphone
- Compact form factor (150mm/6" length)
- Ultra lightweight (85g/3oz)
- 9V battery powered - over 70 hours use (alkaline)
- Integrated shock mounting
- Integrated foam windscreen
- 3.5mm stereo mini-jack output (dual mono)
- Two step High Pass Filter (flat, 80Hz)
- Three position level control (-10dB, 0, +20dB)
- Camera shoe mount with 3/8" thread for easy boompole mounting
The RODE VideoMic Pro is a true shotgun microphone designed for use with camcorders, DSLR cameras and portable audio recorders as a source of primary and reference audio.
At the heart of the VideoMic Pro is an all-new 1/2" condenser capsule that provides broadcast-quality audio via a 3.5mm minijack connector (outputting the mono signal to both left and right channels) with an incredibly low self-noise of just 14db. A super-cardioid polar pattern ensures that surrounding audio is minimised, and your recording is focused on the subject in front of the camera.
The integrated Rycote® Lyre® based shock mounting system separates the VideoMic Pro capsule and electronics from its mount, providing isolation from external physical factors that may cause unwanted rumble and vibrations in the microphone. Constructed from a single piece of hard-wearing thermoplastic, the Lyre® provides superior acoustic suspension to traditional elastic solutions, and will never wear out, sag or snap.
Easily accessible on the rear face of the microphone are the power, filter and level controls. In addition to the microphone's native 40Hz-20kHz response a selectable high-pass filter at 80Hz is available, which will prevent low end noise such as air conditioners and traffic from being recorded.
Below these controls are the level settings, which attenuate or boost the recorded level as required. The -10dB level attenuation (or PAD) is ideal for recording loud sound sources, such as live music, motorsport, or interviews where the subject is very close to the camera. The +20dB level boost is designed for use with DSLR cameras, allowing the user to reduce the camera's preamp level (or mic-input level), effectively reducing the amount of noise generated by the camera's comparatively low quality audio circuitry.
The microphone uses a standard sized shoe mount for on camera use, and features a 3/8" thread in the base of the mount for easy boom pole mounting.
The VideoMic pro is battery powered, and provides over 70 hours recording from a single 9V battery.
The RODE VideoMic is designed and made in Australia, and covered by RODE Microphones' industry leading 10 year warranty.
VIDEOMIC PRO SPECIFICATIONS
- Acoustic Principle: Line Gradient
- Active Electronics: JFET impedance converter
- Capsule: 0.50"
- Address Type: End
- Frequency Range: 40Hz - 20kHz (selected HPF @80)
- Output Impedance: 200ohm
- Maximum SPL: 1/4"BSPL
- Maximum Output Level: 6.9mV (@ 1kHz, 1% THD into 1K? load)
- Sensitivity: -32.0dB re 1 Volt/Pascal (20.00mV @ 94 dB SPL) +/- 2 dB @ 1kHz
- Equivalent Noise Level (A-weighted): 14dBA
- Weight: 85g
- Dimensions: 100mmH x 75mmW x 170mmD
Shipping, Collection and Returns
- Once your order has been shipped please allow 5-7 days for delivery.
- If you intend to collect in store, kindly confirm before ordering since we cannot guarantee stock availability local to you.
- Delivery is free in South Africa for all orders over R995 and any orders below R995 will incur a flat rate of R95.
- ALL International Deliveries are subject to charge and will depend on the size of your order and location. Please see our Shipping Policy for further details.
- Returns need to be initiated within five days of delivery. For further details please see our Cancellation & Returns Policy.
Need Assistance?
- Need more information about this product?
- Require an alternative solution?
- Want to Speak to a Sales Representative?
Be sure to Contact Us Here and we'll be happy to assist you!
Product Disclaimer
Product images are for illustration purposes only and, unless stated otherwise, may not include peripheral or ancillary items depicted in the image.
We Recycle
Pro audio, studio, other electronic goods, smalls and accessories will be delivered in original packaging.
In some cases larger items such as guitars and acoustic drums may be delivered in non-original brown packaging.
In the unlikely event we need to ship in non-original packaging we will inform you.
Refund Policy
Please see the section on ‘Returns’ in our Cancellations & Returns policy to initiate the process. Should you choose not to exchange goods or accept store credit, you are welcome to request a refund via our returns form. We do however ask that you allow enough time for us to arrange collection* and inspect condition of goods upon their return before we can issue a refund. Should a delay of any nature arise during the process of issuing your full or partial refund, we will immediately be in contact.
Refunds will be processed using the original payment method.
- If you paid via EFT, your refund will be issued the Thursday after your request was approved. We reimburse all refunds from FNB so keep in mind that dependent on your bank, it may take a day or two for the refund to reflect in your account. If you have not received your EFT refund within three working days of issue, please contact us immediately.
- If you paid with another method other than EFT, your refund will be actioned upon approval thereof. Please however note that refunds to methods other than EFT is handled via our payment processing partner Peach Payments, they process payments and refunds on our behalf and as such this process can take between 7-14 days and is beyond our control.
*Collection of returned goods only applies to purchases made online. If you bought goods from one of our six retail branches, we kindly request you contact the branch you dealt with directly in order to facilitate your return and refund.